Household Water Treatment: Slow Sand Filtration

April 26, 2012 · 1 comment

Household Water Treatment: Slow Sand Filtration, 2011. CDC.

A slow sand filter is a sand filter adapted for household use. Please note that although commonly referred to as the BioSand Filter, the BioSand Filter terminology is trademarked to one particular design, and this fact sheet encompasses all slow sand filters. The version most widely implemented consists of layers of sand and gravel in a concrete or plastic container approximately 0.9 meters tall and 0.3 meters square. The water level is maintained to 5-6 cm above the sand layer by setting the height of the outlet pipe. This shallow water layer allows a bioactive layer to grow on top of the sand, which contributes to the reduction of disease-causing organisms. A diffuser plate is used to prevent disruption of the biolayer when water is added. To use the filter, users simply pour water into the top, and collect finished water out of the outlet pipe into a bucket. Over time, especially if source water is turbid, the flow rate can decrease. Users can maintain flow rate by cleaning the filter through agitating the top level of sand, or by pre-treating turbid water before filtration.

Bookmark and Share

Leave a Comment

{ 1 comment… read it below or add one }

Dave December 23, 2012 at 2:43 pm

Excellent description of a slow sand filter!!! The best I’ve read yet.


Previous post:

Next post: